030172f523
Captures everything needed to redeploy the two-display clock (hour on I2C 0x61, minute on I2C 0x63) on a fresh Pi: - Both systemd units (matrix0x61.service, matrix0x63.service) - Deployed Pimoroni script tree, including the local %I (12-hour) clock customization - Vendored upstream sources (ltp305-python, breakout-garden) so restore is fully offline-capable - Boot config snippet enabling I2C - install.sh that wires it all back up idempotently - Inventory doc cross-referencing every live-system path Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
73 lines
1.9 KiB
Python
Executable File
73 lines
1.9 KiB
Python
Executable File
#!/usr/bin/env python3
|
|
|
|
import os
|
|
import time
|
|
|
|
from PIL import Image
|
|
from PIL import ImageFont
|
|
from PIL import ImageDraw
|
|
|
|
import VL53L1X
|
|
|
|
from luma.core.interface.serial import spi
|
|
from luma.core.render import canvas
|
|
from luma.oled.device import sh1106
|
|
|
|
print("""This Pimoroni Breakout Garden example requires an
|
|
VL53L1X Time of Flight Sensor Breakout and a 1.12" OLED Breakout (SPI).
|
|
|
|
The Park-O-Matic 6000 is a car reversing indicator mockup!
|
|
|
|
Press Ctrl+C a couple times to exit.
|
|
""")
|
|
|
|
# Set up OLED
|
|
|
|
oled = sh1106(spi(port=0, device=1, gpio_DC=9), rotate=2, height=128, width=128)
|
|
|
|
# Set up VL53L1X Time of Flight sensor
|
|
|
|
tof = VL53L1X.VL53L1X(i2c_bus=1, i2c_address=0x29)
|
|
tof.open() # Initialise the I2C bus and configure the sensor
|
|
tof.start_ranging(3) # Start ranging, 1 = Short Range, 2 = Medium Range, 3 = Long Range
|
|
|
|
|
|
# Load fonts
|
|
|
|
rr_path = os.path.abspath(os.path.join(os.path.dirname(__file__), 'fonts', 'Roboto-Regular.ttf'))
|
|
rb_path = os.path.abspath(os.path.join(os.path.dirname(__file__), 'fonts', 'Roboto-Black.ttf'))
|
|
rr_24 = ImageFont.truetype(rr_path, 24)
|
|
rb_20 = ImageFont.truetype(rb_path, 20)
|
|
rr_12 = ImageFont.truetype(rr_path, 12)
|
|
|
|
|
|
i = 0
|
|
threshold = 20 # Threshold at which the warning indicator flashes, in cm
|
|
|
|
# Main loop
|
|
|
|
while True:
|
|
i += 1
|
|
|
|
background = Image.open("images/distance.png").convert(oled.mode) # Load the artwork
|
|
|
|
draw = ImageDraw.ImageDraw(background)
|
|
|
|
# Measure the distance and write to the right place on the display
|
|
|
|
cm = tof.get_distance() // 10
|
|
cm += 1
|
|
pos = 80 - (rb_20.getsize(str(cm))[0] / 2)
|
|
draw.text((pos, 30), "{}".format(cm), fill="white", font=rb_20)
|
|
|
|
# Flash the warning indicator if the distance is below the threshold
|
|
|
|
if cm > threshold or i % cm == 1:
|
|
draw.rectangle([(76, 66), (115, 110)], fill="black")
|
|
|
|
# Display on the OLED
|
|
|
|
oled.display(background)
|
|
|
|
time.sleep(0.05)
|